Use one 8 oz. bottle of Geo-Loop Conditioner per 1200 gallons of system water.  Pre-mix with 16 oz. of water and shake well.  With system pumps running, pump Geo-Loop Conditioner into system via the Purge Pro, Super Dooper Inducer, or other pumping device.  After conditioner has been introduced to the system, build system pressure to 60psi or higher (do not exceed 160psi).  Circulate for 24 hours, then return system to normal operating mode.  Check system in two weeks for pressure drop.  Treatment can be repeated if necessary.

Geo-Loop Conditioner is an excellent preventive maintenance aid for both residential and commercial geothermal systems.  Once introduced into the geothermal system, this specialized solution coats all surfaces it comes in contact with and cuts down on the formation of rust and corrosion.  Geo-Loop Conditioner has been thoroughly field tested and has proven effective in sealing leaks.  Note:  Do not use if strainer is installed in system.  For prices or to order Geo-Loop Conditioner, please contact us. 

---